Home › Energy Saving Pumps
Energy Saving Pumps
Pumps are often the largest electricity users in a factory, building or water scheme. Choosing an energy saving pump system lowers running costs for its whole life - and in Ethiopia, where many sites have unreliable grid power, it can also mean switching to solar.
ኃይል ቆጣቢ ፓምፖች የኤሌክትሪክ ወጪን ይቀንሳሉ። በተለዋዋጭ ፍጥነት መቆጣጠሪያ (VFD)፣ ከፍተኛ ብቃት ያላቸው IE3 ሞተሮችና በፀሐይ ኃይል የሚሰሩ ፓምፖች ለኢትዮጵያ ሁኔታ ተስማሚ ናቸው። ለጣቢያዎ የሚስማማ ኃይል ቆጣቢ ፓምፕ እንዲመርጡ እናግዝዎታለን።
Request a quoteBrowse all productsVariable speed drives (VFD): the biggest saving
Most pumps run at full speed all the time and throttle the flow with a valve, wasting the difference as heat. A variable speed drive slows the motor to match the demand instead. Because a pump's power use falls with the cube of its speed, running at 80% speed needs only about half the power. Pump manufacturers report savings of up to 70% on systems with varying demand, such as building water supply and booster sets.
High-efficiency IE3 motors
Motors are graded IE1 to IE4. Moving from an IE2 to an IE3 motor typically adds only two to three percentage points of efficiency, but on a pump that runs most of the day that difference adds up, and an IE3 motor holds its efficiency better when the flow is reduced. Combine an efficient motor with a drive for the best result.
Right-sized pumps
An oversized pump wastes energy every hour it runs. Selecting the pump for the actual head and flow - not the largest model that fits - is the cheapest energy saving of all.
Solar water pumps for off-grid sites
Only a small share of Ethiopians have continuous grid electricity, so solar pumping is often the most reliable and lowest-cost option for farms, irrigation and rural water supply. A solar pump runs directly from panels during the day and stores water in a tank, removing diesel fuel and generator costs.
How Mensur helps
We supply pumps, high-efficiency motors, variable speed drives and the electrical components to install them, and help you size the system for your site. Send us your current pump details and electricity use to compare options.
Pumps, drives and motors available now
Ask us for current models and prices - our range changes with each shipment.
Frequently asked questions
What is an energy saving pump?
A pump system that uses less electricity for the same water delivered - typically through a variable speed drive (VFD), a high-efficiency IE3 motor, correct sizing, or solar power.
How much energy can a variable speed drive save?
It depends on how much the demand varies. Because pump power falls with the cube of speed, running at 80% speed needs about half the power; manufacturers report up to 70% savings on systems with strongly varying demand.
Is a solar water pump worth it in Ethiopia?
For sites without reliable grid power, usually yes: there is no fuel cost, and daytime pumping into a storage tank covers most irrigation and village water needs.